Important information!
We have a new supplier for the bits below! The prices are now lower, and the bits will be higher quality, resharpenned by Kyocera Tycom USA
The bits are currently in-transit and will be available soon.
Solid carbide routing bits
 |
Solid Carbide ROUTER bit - #60 (~1.00mm)
Ultra-sharp Solid Carbide router bit, used to cut shapes into (or route edges of) a PCB. These bits were LIGHTLY USED to engineer MILITARY SPEC circuitboards, and were thus decommissioned early with PLENTY of usable life left. While designed for routing PCB substrate, it's perfectly suitable for other materials such as wood, cardboard and phenolic
|
Solid carbide PCB drillbits
 |
Solid tungsten-carbide PCB drillbit, 0.25mm (resharpened)
Ultra-sharp 0.25mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.30mm (resharpened)
Ultra-sharp 0.30mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.35mm (resharpened)
Ultra-sharp 0.35mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.40mm (resharpened)
Ultra-sharp 0.40mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.45mm (resharpened)
Ultra-sharp 0.45mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.50mm (resharpened)
Ultra-sharp 0.50mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.55mm (resharpened)
Ultra-sharp 0.55mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.60mm (resharpened)
Ultra-sharp 0.60mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.65mm (resharpened)
Ultra-sharp 0.65mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.70mm (resharpened)
Ultra-sharp 0.70mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.75mm (resharpened)
Ultra-sharp 0.75mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.80mm (resharpened)
Ultra-sharp 0.80mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.85mm (resharpened)
Ultra-sharp 0.85mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.90mm (resharpened)
Ultra-sharp 0.90mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 0.95mm (resharpened)
Ultra-sharp 0.95mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 1.00mm (resharpened)
Ultra-sharp 1.00mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 1.05mm (resharpened)
Ultra-sharp 1.05mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 1.10mm (resharpened)
Ultra-sharp 1.10mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 1.15mm (resharpened)
Ultra-sharp 1.15mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 1.20mm (resharpened)
Ultra-sharp 1.20mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
|
Solid tungsten-carbide PCB drillbit, 1.45mm (resharpened)
Ultra-sharp 1.45mm tungsten carbide PCB drillbit professionally re-sharpenned by Kyocera-Tycom in the USA. These bits have seen very little use in the field, and have had their cutting edge sharpenned to as-new condition. Sharp enough to drill through glass, and even other drillbits! Individually packed to protect against breakage during transport.
|
AMTECH tacky paste fluxes
