AMTECH tacky paste fluxes
Goot® soldering consumables
Polyimide adhesive films
Silver-plating powder
 |
GENUINE Amtech NC-559-ASM Paste flux, 10CC + Tip & Plunger Brilliant no-clean tacky paste flux by AMTECH with unbelievable wetting ability. Works exceptionally well at both low and high temperatures; suitable for RoHS compliant SMD rework (RMA-223 is recommended for high temperature soldering of heatsinks, etc) Supplied with a plunger and two tips (metal, plastic) |
| NC559-ORG | 1+ $6.95 ea | 5+ $6.65 ea | 10+ $6.25 ea |
| Available stock: 48 | Weight: 100g | Add to cart | |
 |
GENUINE Amtech RMA-223-TPF Paste flux, 10CC An excellent general purpose flux perfectly suited to SMT and BGA reworking. These have been purchased from AMTECH directly and are certified genuine. Comes with two dispensing tips (metal and plastic) as well as a plunger for manual dispensing. Please see our PasteFlux article for more information *** Discontinued item, available until stock exhausted *** |
| RMA223-ORG | 1+ $6.45 ea | 5+ $6.15 ea | 10+ $5.75 ea |
| Available stock: 10 | Weight: 75g | Add to cart | |
 |
GENUINE Amtech RMA-223-TPF Paste flux, 10CC + Tip & Plunger Same as the above item, supplied with two tips (metal and plastic), as well as a plunger for manual dispensing. Please see our PasteFlux article for more information *** Discontinued item, available until stock exhausted *** |
| RMA223-10CC | 1+ $6.95 ea | 5+ $6.65 ea | 10+ $6.25 ea |
| Available stock: 11 | Weight: 75g | Add to cart | |
 |
Goot® Japanese solder wick, 3.0mm x 1.5 metres Fantastic 3.0mm desoldering wick from Goot® in Japan. Comes on a 1.5m soft-plastic spool for easy dispensing. It's also RoHS compliant and contains RMA flux for superior solder-drawing ability. 100% genuine and made in Japan, unlike the knock-offs you'd find on EBay and DealExtreme. Lowest retail price Australia-wide! |
| gwick-3mm | 1+ $3.70 ea | 5+ $3.52 ea | 10+ $3.33 ea |
| Available stock: 21 | Weight: 2g | Add to cart | |
 |
Goot® Japanese solder wick, 2.0mm x 1.5 metres Fantastic 2.0mm desoldering wick from Goot® in Japan. Comes on a 1.5m soft-plastic spool for easy dispensing. It's also RoHS compliant and contains RMA flux for superior solder-drawing ability. 100% genuine and made in Japan, unlike the knock-offs you'd find on EBay and DealExtreme. Lowest retail price Australia-wide! |
| gwick-2mm | 1+ $3.70 ea | 5+ $3.52 ea | 10+ $3.33 ea |
| Available stock: 21 | Weight: 2g | Add to cart | |
 |
Goot® Japanese solder wick, 1.5mm x 1.5 metres Fantastic 1.5mm desoldering wick from Goot® in Japan. Comes on a 1.5m soft-plastic spool for easy dispensing. It's also RoHS compliant and contains RMA flux for superior solder-drawing ability. 100% genuine and made in Japan, unlike the knock-offs you'd find on EBay and DealExtreme. Lowest retail price Australia-wide! |
| gwick-15mm | 1+ $3.70 ea | 5+ $3.52 ea | 10+ $3.33 ea |
| Available stock: 21 | Weight: 2g | Add to cart | |
 |
Goot® soldering iron tip refresher Don't you hate it when solder refuses to stick to your iron's tip? Goot® did too, only they got off their lazy ass and did something about it! This product contains a mixture of tin powder, an Ammonium-phosphate based flux and more than likely, the blood of an untainted virgin. Simply dip your iron's tip into the mix for a few seconds, remove, and it's as good as new! |
| gchem-tcla | 1+ $9.95 ea | 5+ $9.75 ea | 10+ $9.50 ea |
| Available stock: 22 | Weight: 20g | Add to cart | |
 |
5mm "Kapton" Polyimide film, 33 metre roll 5mm high-temperature polyimide film, used as a temporary solder mask for repair/rework (or other applications where a high temperature adhesive is required). Silicone-based adhesive, withstands 260oC for one hour, and 400oC for short periods. See our Kapton Masking tutorial for usage information |
| kap-5mm | 1+ $2.95 ea | 5+ $2.75 ea | 10+ $2.50 ea |
| Available stock: 34 | Weight: 10g | Add to cart | |
|
10mm "Kapton" Polyimide film, 33 metre roll 10mm high-temperature polyimide film, used as a temporary solder mask for repair/rework (or other applications where a high temperature adhesive is required). Silicone-based adhesive, withstands 260oC for one hour, and 400oC for short periods. See our Kapton Masking tutorial for usage information |
| kap-10mm | 1+ $3.95 ea | 5+ $3.75 ea | 10+ $3.50 ea |
| Available stock: 38 | Weight: 10g | Add to cart | |
 |
Cool-Amp PCB Silver-Plating powder (four gram vial) A fantastic Silver Plating Powder by Cool-Amp Conducto-Lube Inc with an indefinite shelf-life. We've obtained permission from Cool-Amp to distribute this in small affordable "sampler vials". Each vial contains 4 Grams (by volume) of plating powder, enough to silver-plate up to fifty square inches of copper. Firmly rub a small amount onto your PCB using a slightly dampenned paper towel for instant silver-plating! |
| cavial-4g | 1+ $3.95 ea | 5+ $3.65 ea | 10+ $3.50 ea |
| Available stock: 157 | Weight: 10g | Add to cart | |