PulsarProFX Starter kits

Skip to PulsarProFX Blank 0.8MM PCBs »
PulsarProFX PCB Fab-In-A-Box kit

Our biggest seller! This is a value pack containing the following: Two packs of TTS paper, a twin pack of DOUBLE SIDED circuitboard, a twin pack of SINGLE SIDED circuitboard, a pack of Green TRF foil, a pack of White TRF foil and some sample pre-printed artwork. See the manufacturers product page by clicking here, or check out our PCB Tutorial for a complete usage guide
fibox 1+ $89.95 ea 3+ $84.95 ea 5+ $79.95 ea
Available stock: 5 Weight: 842g Add to cart

PulsarProFX Blank 0.8MM PCBs

Skip to PulsarProFX Toner Transfer supplies »
PulsarProFX 8 x 10 inch (203 x 254mm) DOUBLE layer PCB - Pack of 2

FR-4/G10 fiberglass 8 x 10 inch, 0.032 inch (0.8mm) thick double sided PCB with ½ oz copper for rapid etching. Pack of two
dspcb-1oz 1+ $21.95 ea 3+ $20.95 ea 5+ $19.95 ea
Available stock: 15 Weight: 194g Add to cart
PulsarProFX 8 x 10 inch (203 x 254mm) SINGLE layer PCB - Pack of 2

FR-4/G10 fiberglass 8 x 10 inch, 0.032 inch (0.8mm) thick single sided PCB with ½ oz copper for rapid etching. Pack of two
sspcb-1oz 1+ $19.75 ea 3+ $18.75 ea 5+ $17.50 ea
Available stock: 12 Weight: 182g Add to cart

PulsarProFX Toner Transfer supplies

Skip to Circuitboard etchant »
PulsarProFX Toner Reactive Foil (TRF) - Green

Green foil used to “seal” toner transfers prior to etching, 8 inches wide x 15 feet long. For more information on this product, see the manufacturers product page by clicking here
gtrf 1+ $10.50 ea 3+ $10.00 ea 5+ $9.50 ea
Available stock: 14 Weight: 64g Add to cart
PulsarProFX Toner Reactive Foil (TRF) - White

White foil used for silkscreening PCBs, 8 inches wide x 15 feet long. For more information on this product, see the manufacturers product page by clicking here
wtrf 1+ $10.50 ea 3+ $10.00 ea 5+ $9.50 ea
Available stock: 12 Weight: 64g Add to cart
PulsarProFX Toner Transfer Paper (TTS) - Pack of 10

Briliant Toner Transfer Paper used for rapidly engineering complex circuitboards, we highly recommend using this in conjuction with our TRF foils for the best results. Standard “US Letter” sized pages, 10 sheets per pack and certified printer safe! For more information on this product, see the manufacturers product page by clicking here, or check out our A-to-Z write-up on PCB fabrication here for examples!
ttspaper 1+ $17.95 ea 3+ $16.95 ea 5+ $15.95 ea
Available stock: 7 Weight: 116g Add to cart

Circuitboard etchant

Anhydrous Ferric Chloride etchant - 100G

Reusable Ferric Chloride etchant in pure crystal form, works best when heated to ~45C, and even better with the Edinburgh Etch Method (thanks to Grant of UltraLogic for the tip!). Mix with water to create 400mL of highly concentrated etchant, which can then be stored in a bottle and re-used many times over.

Generates its own heat when mixed with water via an exothermic reaction, so you can mix just enough for the task at-hand to avoid manually heating the solution yourself
FECL-100G 1+ $4.20 ea 5+ $4.00 ea 10+ $3.80 ea
Available stock: 4 Weight: 100g Add to cart